MIMAKI SINGAPORE PTE. LTD.

JFXplus Series [End of sale]

Specifications

 JFX-1631plusJFX-1615plus
Head On-demand Piezo head
Print resolution 300 × 600 dpi, 450 × 600 dpi, 600 × 600 dpi,
600 × 1200 dpi,1200 × 1200 dpi
InkType LH-100 UV ink (C/M/Y/K/W/CL)
LF-140 UV ink (C/M/Y/K/Lc/Lm/W)
LF-200 UV ink (C/M/Y/K/W)
Capacity 600 ml ink pack
Maximum print width (W) × (D)  1,602 × 3,100 mm
(63.1 × 122 ")
1,602 × 1,500 mm
(63.1 × 59.1 ")
With post-curing unit 1,602 × 2,700 mm
(63.1 × 106.3 ")
1,602 × 1,100 mm
(63.1 × 43.3 ")
Print accuracyAbsolute accuracy ± 0.3 mm (0.01 ") or ± 0.3% from specified print distance
Repeatability ± 0.2 mm (0.01 ") or ± 0.1% from specified print distance
Perpendicularity ± 0.5 mm / 500 mm (0.02 / 19.7 ")
Usable mediaSize (W×D) 1,644 × 3,194 mm
(64.7 × 125.7 ")
1,644 × 1,594 mm
(64.7 × 62.8 ")
Thickness Max. 50 mm (2 ")
Weight Less than 50 kg (110.2 lbs.)
(when the media is loaded evenly)
Media table Air suction by vacuum
Vacuum area Vertically divided into 4 zones Vertically divided into 2 zones
UV unit  Equipped with UV Light Emitting Diodes
Lifetime *1 About 10,000 hours
Post-curing unitUV unit Equipped with fluorescent UV tube lamp *2
Lifetime *1 About 1,000 hours *3
Power specifications 1-phase : AC 200 - 240 V, 50/60 Hz,
(power from main unit)
Power consumption Less than 400 VA
Dimensions / Weight
(W) × (D) × (H)
1,980 mm × 185 mm × 300 mm / 13 kg
(78 × 7.3 × 11.8 " / 28.7 lbs.)
Interface USB 2.0
Applicable standard VCCI class A, CE Marking, CB Report, UL, RoHS Directive
Power specifications AC 200 – 240 V, 50/60 Hz
Power consumption Less than 2.0 kVA
Operational environmentTemperature 15 – 30 °C (59 – 86 °F)
Humidity 35 – 65 %Rh
Temperature accuracy 18 – 25 °C (64.4 – 77 °F)
Temperature gradient Less than ± 10 °C/h (18 °F)
Dust Equivalent to normal office level
Dimensions (W) × (D) × (H) 4,200 × 4,300 × 1,600 mm
(165.4 × 169.3 × 63 ")
4,200 × 2,620 × 1,600 mm
(165.4 × 103.1 × 63 ")
Weight 1,613 kg (3,556 lbs.) 1,313 kg (2,894.6 lbs.)

*1 Reference value. There is no guarantee as to the lifetime.
*2 Post-curing unit is equipped with 3 fluorescent UV tube lamps in one set.
*3 After about 1,000 hours of usage illumination level declines by about 20%.
・Inks would not be cured when printing speed is faster than that of draft mode.

  • All trademarks or registered trademarks are the property of their respective owners.
  • Specifications are subject to change without notice.
  • Some of the screens and printing samples in this website are artificial renderings.
  • Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.

Inks and substrates:
  • Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
  • Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.

Safety notice:

You are dealing with UV light sources that may harm your health. Please follow below guidelines strictly:

  • Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
  • Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
  • In addition, please read the instructions and guidelines of the manual carefully and follow those.

JFXplus Series Catalog (1.56MB)pdf file

Model

JFX-1615plus Maximum print area: 1,602 x 1,500 mm (63.1 x 59.1")
JFX-1631plus Maximum print area: 1,602 x 3,100 mm (63.1 x 122.0")

Related products

Return to Content

PAGETOP