MIMAKI SINGAPORE PTE. LTD.

ME Series [End of sale]

Automatic material height sensing and constant depth engraving


Material height sensor eliminates needs for manual adjustment of spindle height and ensures constant depth engraving on a material with uneven thickness.

3D-Engraving


ME Series

Simultaneous 3-axis linear interpolation enables smooth and speedy 3D engraving.


Maximum engraving areas


ME Series

ME-500 : 483X305mm(19X12")
ME-650 : 650X440mm(25.6X17.3")

Long materials can be set along the front-back direction. Maximum material widths are 650mm(25.6") for the ME-500 and 750mm(29.5") for the ME-650.


HP-GL* compatible


Most of sign-making and CAD software programs for both PC and MAC support HP-GL.
The ME-500/ME-650 can be driven by these programs.
*HP-GL is a trademark of Hewlett-Packard Co.


60mm Z-stroke


ME Series

Spindle can move up to 60mm(2.4") above table and allows materials of up to 50mm(2.0") to be set.


Chip removal attachment and adaptor


The ME-500/ME-650 are equipped with a chip removal attachment and an adaptor to a vacuum pump.
Typical vacuum pump* can be easily attached to the adaptor.
Optional Vacuum Pump Controller turns on/off power to the vacuum pump so it will run only when engraving.
*Vacuum pump is not included.


Large memory buffer


A computer can send jobs to the ME-5--/ME-650's one megabyte memory buffer without waiting for the ME-500/ME-650 to finish engraving.
The computer therefore can be used for another fob while the ME-500/ME-650 are engraving.
Also, data stored in the memory can be used to engrave the same job.


Wide variety of materials


The ME-500/ME-650 can engrave on metals as well as plastics.


Software controllable spindle height adjustment


Spindle height adjustment can be done through software as well as from the ME-500/ME-650's handy operation panel, which makes multi-pass engraving easy.


Two sizes, A3 and A2 are offered for each model to meet applications.


ME-500 is suitable for modeling. ME-650 is suitable for letter engraving. Please select a suitable model and size according to applications.


ME Series Catalog (759.65KB)pdf file

Model

ME-500ST Maximum engraving area: 483 x 305 mm (19.0 x 12.0")
ME-500BS Maximum engraving area: 483 x 305 mm (19.0 x 12.0")
ME-650ST Maximum engraving area: 650 x 440 mm (25.6 x 17.3")
ME-650BS Maximum engraving area: 650 x 440 mm (25.6 x 17.3")

Application list

  • Carving

Related products

Return to Content

PAGETOP