Setting Sorting
- Press the [FUNCTION] key in local mode.
- Use
to select [SET UP], then press the [ENTER/HOLD] key.
- Use
to select [SORTING], then press the [ENTER/HOLD] key.
- Use
to select [ON], then press the [ENTER/HOLD] key.
- Use
to select the [AUTO FEED] setting, then press the [ENTER/HOLD] key.
- Select [ON] if auto feed is required.
- Use
to select the [AREA] setting, then press the [ENTER/HOLD] key.
- Setting: OFF or 10 to 5,100 cm (in 10 cm increments)
- Press the [END] key several times to exit.
![](https://d283umxtky5avq.cloudfront.net/themes/manual@mimaki/cg-ar-series/operation_manual/en-US/../assets/img/safety-symbols/Important__en-US.png)
- The settings are retained even when the power is turned off.
- Altering the setting clears the receive buffer contents.
- Enabling sorting reduces the receive buffer size to approximately 20 MB.