2. Helpful Tips
3. Other Useful Functions
4. Sheet Feed

1. Other Useful Functions

Sheet Feed

The sheet can be pulled out in advance before cutting (or printing).
This allows any sheet skew to be checked and prevented.

• High-speed cutting with a roll sheet still rolled up may result in errors if the sheet drive is unable to keep up.
• The feed function cannot be enabled unless the sheet has been detected.

1. Press the [FUNCTION] key in local mode.

2. Use to select [SHEET FEED], then press the [ENTER/HOLD] key.

3. Use to enter the length for pulling out the sheet, then press the [ENTER/HOLD] key.

• Setting: 0.1 m to 51.0 m (in 0.1 m increments)

• The sheet is pulled out by the length corresponding to the entered length plus the feed offset. Feed Settings [FEED OPTION]

• To stop sheet feed midway, press the [END] key.