Aborting Cutting (Data Clear)
![](https://d283umxtky5avq.cloudfront.net/themes/manual@mimaki/cg-ar-series/operation_manual/en-US/../safety/Action_Action.png)
- If data is not cleared, data already received will be cut on returning to remote mode.
- If data is cleared and data is received after returning to remote mode, new data will be cut.
- Do not clear data while data is in the process of being sent.
- Check to confirm that data is not currently being received.
- Check, at the top right of the screen, that the amount of data received is not increasing.
![](https://d283umxtky5avq.cloudfront.net/themes/manual@mimaki/cg-ar-series/operation_manual/en-US/../safety/Action_Action.png)
- Do not clear data while data is being received.
- Press the [REMOTE] key.
- Cutting is paused.
- Press the [FUNCTION] key.
- Press
to select [DATA CLEAR], then press the [ENTER/HOLD] key.
- The data is cleared.
![](https://d283umxtky5avq.cloudfront.net/themes/manual@mimaki/cg-ar-series/operation_manual/en-US/../assets/img/safety-symbols/Hint.png)
- The data received remains within the receiving buffer even after using data clear. Repeated cutting is possible using the multiple sheet cutting function.