MRA Usage Conditions
The following operating environment is required to use MRA:
Required operating environment
No. | Device | Operating environment |
|---|---|---|
1 | Mimaki printer/plotter | A printer/plotter supporting remote operation |
2 | PC | A Windows PC with software such as RasterLink and FineCut9 installed as well as MRA |
3 | Wireless LAN router | A communication device allowing wireless connection to the network to which the printer/plotter and PC are connected |
4 | Smartphone | A smartphone on which MRA has been installed |
5 | USB cable | A USB cable connecting the printer/plotter to the PC |
6 | Ethernet cable | Ethernet cables for connecting the printer/plotter, PC, and wireless LAN router |
Printer/Plotter and PC/Smartphone Connection Examples
Required device specifications
Device | Operating environment/recommended version |
|---|---|
PC |
Ver. 22H2 or later |
Smartphone |
|
Available functions, by model
Category | Model | Information display | Panel operation |
|---|---|---|---|
Printer | JV330 Series |
|
|
CJV200 Series |
|
| |
CJV330 Series |
|
| |
UCJV330 Series |
|
| |
TS330 |
|
| |
TS330-3200DS |
|
| |
UJV100-160 plus |
|
| |
TxF150-75 |
|
| |
TxF300 Series |
|
| |
UJF-7151 plus |
|
| |
UJF-7151 plusII |
|
| |
UJF-3042MkII e, UJF-3042MkII EX e |
|
| |
UJF-6042MkII e |
|
| |
Plotter | CG-AR Series |
|
|
CFX Series |
|
|
Firmware version of supported models
Category | Model | Firmware version | Remarks |
|---|---|---|---|
Printer | JV330 Series, CJV330 Series, UCJV330 Series, TS330 | v1.1 or later |
|
CJV200 Series | v1.1 or later |
| |
TS330-3200DS | v1.1 or later |
| |
UJV100-160 plus | v1.1 or later |
| |
TxF150-75 | v1.2 or later |
| |
TxF300 Series | v2.0 or later |
| |
UJF-7151 plus | v3.40 or later |
| |
UJF-7151 plusII | v1.5 or later | Long press function is supported from v1.6. | |
UJF-3042MkII e, UJF-3042MkII EX e, UJF-6042MkII e | v1.2 or later |
| |
Plotter | CG-AR Series | v1.1 or later |
|
CFX Series | v1.1 or later |
|
