1. Information Display Screen

For printers

The information display screen is arranged as follows:

Printer information screen configuration_
  1. [Model Information]
    The model name, serial number, and firmware version

  2. [Status]
    The current printer/plotter status*4

  3. [Ink Information]
    The inkset name and ink levels (cc) for each color

  4. [Waste Ink Volume]
    The ink level (%) in the waste ink tank

  5. [Heater Temperature]
    (PRE/PRINT/POST/Ext)*1

  6. [Media Information]
    The media width and remaining length (mm)*3

  7. Notifications/Alerts*2
    Up to four can be displayed at the same time.
    If more than four messages are present, the display toggles through the messages at a fixed interval.

  8. Reload
    Refreshes the printer/plotter information on the app.

  9. Menu

  10. Model icon
    Click the icon to display the panel operation screen.

  1. Not displayed for models without a heater function.

  2. The details displayed will vary depending on the model and status.

  3. The remaining amount of media is displayed for models equipped with a roll but not for flatbed models.

  4. The icon will vary as follows depending on the printer/plotter status.

Icon

Status

Explanation

Large not ready icon

Not Ready

The media has not yet been detected.

No Media

The media has not been set.

Not displayed for flat systems.

Cover Open

The front or maintenance cover is open.

Large offline icon

Local

Local idle status.

Busy

Function is currently being run.

Data Remain

Local idle status and data is being received.

Large online icon

Remote

Remote idle status.

Remote Active

Printing or cutting is currently in progress.

Remote Wait

Printing/plotting is not possible as heater is currently warming up.