Displaying the Information Screen of Models Connected in RasterLink7
Starting MRA from RasterLink7 enables direct access to the printer's information display screen.
- Only available for printers for which [Ethernet] was selected as the output port during printer registration to RasterLink7.
- Start RasterLink7 (ver. 3.1.0 or later).
- Select the tab for the printer with information to display in MRA.
- Make sure the printer is compatible with MRA.MRA Usage Conditions
- In the menu, select [Tools] - [MimakiRemoteAccess].
- MRA starts up and the information display screen of the printer connected in RasterLink7 appears.
The information display screen cannot be accessed in the following cases.
- If the printer is not on
- If the printer is not compatible with MRA
MRA Usage Conditions
