※When it is clicked, the illustrate will be enlarged.
- Product Name
- Swivel Blade for PVC sheet
- Part Number
- SPB-0001
- Offset value
- 0.3mm
- [Feature]
- The standard blade for cutting adhesive-backed sheet like vinyl. The blade is hardly broken while higher cutting pressure is required.
- [Corresponding
machine] - CG-FX Series, CG-FXII Series, CG-LX Series, CG-EX Series, CG-60SR, CG-60st, CG90AP, CG-SD Series, CG-45/50/61/101,CF/CF2 Series,CFR-1220
- Product Name
- Swivel Blade for small letters
- Part Number
- SPB-0003
- Offset value
- 0.15mm
- [Feature]
- The blade is for cutting small letters of adhesive-backed sheets.
- [Corresponding
machine] - CG-FX Series, CG-FXII Series, CG-LX Series, CG-EX Series, CG-60SR, CG-60st, CG90AP, CG-SD Series, CG-45/50/61/101,CF/CF2 Series,CFR-1220
- Product Name
- Swivel Blade for rubber sheet
- Part Number
- SPB-0005
- Offset value
- 0.75mm
- [Feature]
- The blade for cutting rubber sheet up to 0.8mm thickness. Backing sheet of the rubber should be hard.
- [Corresponding
machine] - CG-FX Series, CG-FXII Series, CG-LX Series, CG-EX Series, CG-60SR, CG-60st, CG90AP, CG-SD Series, CG-45/50/61/101,CF/CF2 Series,CFR-1220
- Product Name
- Swivel Blade for reflecting sheet
- Part Number
- SPB-0006
- Offset value
- 0.75mm
- [Feature]
- The blade is for cutting reflecting sheet. As it is coated by titanium, it has high durability.
- [Corresponding
machine] - CG-FX Series, CG-FXII Series, CG-LX Series, CG-EX Series, CG-60SR, CG-60st, CG90AP, CG-SD Series, CG-45/50/61/101,CF/CF2 Series,CFR-1220
- Product Name
- Swivel Blade for fluorescent sheet
- Part Number
- SPB-0007
- Offset value
- 0.5mm
- [Feature]
- The blade for fluorescent sheet.
- [Corresponding
machine] - CG-FX Series, CG-FXII Series, CG-LX Series, CG-EX Series, CG-60SR, CG-60st, CG90AP, CG-SD Series, CG-45/50/61/101,CF/CF2 Series,CFR-1220
- Product Name
- Swivel Blade for PVC with low-pressure
- Part Number
- SPB-0030
- Offset value
- 0.3mm
- [Feature]
- The standard blade for cutting adhesive-backed sheet vinyl. Cutting pressure can be set lower than SPB-0001. The blade is a standard item with CG Series.
- [Corresponding
machine] - CG-FX Series, CG-FXII Series, CG-LX Series, CG-EX Series, CG-60SR, CG-60st, CG90AP, CG-SD Series, CG-45/50/61/101,CF/CF2 Series,CFR-1220
- Product Name
- High-speed steel blade 30°
- Part Number
- SPB-0043
- Media thickness
- Up to 5mm
- [Feature]
- The blades are suitable to cut relatively soft materials up to 5 mm.
- [Materials]
- Natural rubber, Industrial rubber, Rubber cork,(Composite)leather, PVC, Polyethylene film, Softron, Neo sponge, Carbon containing materials, Felt, and campus.
- [Corresponding
machine] - CF/CF2 Series, and CFR-1220/CFS-1313
- Product Name
- High-speed steel blade 45°
- Part Number
- SPB-0044
- Media thickness
- Up to 2mm
- [Feature]
- The blades are suitable to cut relatively soft materials up to 2 mm.
- [Materials]
- Natural rubber, Industrial rubber, Rubber cork,(Composite)leather, PVC, Polyethylene film, Softron, Neo sponge, Carbon containing materials, Felt, and campus.
- [Corresponding
machine] - CF/CF2 Series, and CFR-1220/CFS-1313
- Product Name
- Carbide blade 30°
- Part Number
- SPB-0045
- Media thickness
- Up to 5mm
- [Feature]
- The blades are suitable to cut relatively hard materials with high precision. The one is more durable than High-speed steel blades.
- [Materials]
- It is suitable for relatively hard materials.
- [Corresponding
machine] - CF/CF2 Series, and CFR-1220/CFS-1313
- Product Name
- Carbide blade 45°
- Part Number
- SPB-0046
- Media thickness
- Up to 2mm
- [Feature]
- The blades are suitable to cut relatively hard materials with high precision. The one is more durable than High-speed steel blades.
- [Materials]
- It is suitable for relatively hard materials.
- [Corresponding
machine] - CF/CF2 Series, and CFR-1220/CFS-1313
- Product Name
- Titanium-coated blade 30°
- Part Number
- SPB-0047
- Media thickness
- Up to 5mm
- [Feature]
- The blades are suitable to curt materials that need more durability to cut than Carbide blades.
- [Materials]
- Carbon containing materials, or Fibrous glass containing materials
- [Corresponding
machine] - CF/CF2 Series, and CFR-1220/CFS-1313
- Product Name
- Titanium-coated blade 45°
- Part Number
- SPB-0008
- Media thickness
- Up to 4mm
- [Feature]
- The blades are suitable to curt materials that need more durability to cut than Carbide blades.
- [Materials]
- Carbon containing materials, or Fibrous glass containing materials
- [Corresponding
machine] - CF/CF2 Series, and CFR-1220/CFS-1313
- Product Name
- High-speed steel blade 30°
- Part Number
- SPB-0048
- Media thickness
- Up to 7mm
- [Feature]
- The blade is used to cut up to 7mm thickness of the same materials as High-speed steel blade.
- [Materials]
- Natural rubber, Industrial rubber, Rubber cork,(Composite)leather, PVC, Polyethylene film, Softron, Neo sponge, Carbon containing materials, Felt, and campus.
- [Corresponding
machine] - CF/CF2 Series, and CFR-1220/CFS-1313
- Product Name
- Carbide design blade 30°
- Part Number
- SPB-0051
- Media thickness
- Joint sheet: up to 3mm
Fluorine contained resin: up to 5mm
- [Feature]
- The blade is used to cut up to 10mm thickness of the same materials as Carbide blade.
- [Materials]
- Joint sheet, and Fluorine contained resin etc.
- [Corresponding
machine] - CF/CF2 Series, and CFR-1220/CFS-1313
- Product Name
- Carbide both blades
- Part Number
- SPB-0031
- Media thickness
- Up to 3mm
- [Feature]
- It is developed to cut 3mm thickness of joint sheet. It is good for combination cut with Carbide blade 30°. The blade has less deflection as it has φ3mm rod-shaped edge, therefore it is suitable to cut thin materials requiring high accuracy.
- [Corresponding
machine] - CF/CF2 Series, and CFR-1220
- Product Name
- Titanium coated both blades
- Part Number
- SPB-0009
- Media thickness
- Up to 2mm
- [Feature]
- The blade is 2mm thickness to cut high intensity reflective sheet with high pressure. It is suitable to cut relatively big characters or figures.
- [Corresponding
machine] - CF/CF2 Series, and CFR-1220
- Product Name
- 20mm blade
- Part Number
- SPB-0055
- Media thickness
- Up to 10mm
- [Feature]
- The blade is developed for corrugated board with reciprocating cutting. It has made possible to cut double-faced corrugated board. Although the durability of the blade is lower than its SPB-0065, the price is more affordable. It is recommended for less frequently used customers.
- [Corresponding
machine] - CF2-RC・CFR-1220
- Product Name
- 40mm blade
- Part Number
- SPB-0056
- Media thickness
- Up to 40mm
- [Feature]
- The blade is developed for foam materials with reciprocating cutting.
It is suitable to cut up to 40mm thickness of foam board. - [Corresponding
machine] - CFR-1220
- Product Name
- 60mm blade
- Part Number
- SPB-0062
- Media thickness
- Up to 60mm
- [Feature]
- The blade is developed for foam materials with reciprocating cutting.
It is suitable to cut up to 60mm thickness of foam board. - [Corresponding
machine] - CFR-1220
- Product Name
- Carbide blade 2°
- Part Number
- SPB-0064
- Media thickness
- Up to 20mm
- [Feature]
- The blade is developed for foam materials with reciprocating cutting.
It is suitable to cut up to 20mm thickness of foam board. - [Corresponding
machine] - CF2-RT
- Product Name
- Carbide blade 17°
- Part Number
- SPB-0065
- Media thickness
- Up to 10mm
- [Feature]
- The blade is developed for corrugated board with reciprocating cutting. Although the price is higher than SPB-0055, this blade has higher durability and is used to cut double-faced corrugated board. It is recommended for high frequently used customers.
- [Corresponding
machine] - CF2-RC