• Return back to list

FineCut/Coat9 for Illustrator Ver2.5 Windows (Illustrator CS6 - 2023 (32 bit/64 bit))

Type	Software
Version	2.5
Release date	01/31/2023
Supported OS	Windows 7 Windows 7 (32bit) Windows 7 (64bit) Windows 8.1 Windows 8.1 (32bit) Windows 8.1 (64bit) Windows 10 Windows 10 (32bit) Windows 10 (64bit) Windows 11
Supported Software	FineCut/Coat9 for Illustrator
Application	Adobe Illustrator CS6/CC/CC2014/CC2015/CC2015.3/CC2017/CC2018/CC2019/2020/2021/2022/2023 (32 bit/64 bit) English/German/French/Italian/Spanish/Russian/Simplified Chinese/Traditional Chinese

About this Upgrade software

• FineCut9 serial key or FineCut/Coat9 serial key is required after software updating.
• Free upgrade to FineCut/Coat9 from FineCut8 is available if you have FineCut8 CD-ROM.
• How to issue a FineCut9 serial key from FineCut8 CD-ROM, please see here.

For FineCut/Coat9 Ver2.3 or less users

• The register mark created with FineCut/Coat9 Ver2.4 or later cannot be recognized by FineCut/Coat9 Ver2.3 or less.
   If you want to recognize register mark created with FineCut/Coat9 Ver2.3 or less, create them with FineCut/Coat9 Ver2.3 or less.

  Register Mark Creation Ver	Register Mark Detection Ver
  	Ver2.3 or less	Ver2.4 or later
  Ver2.3 or less	✔	✔
  Ver2.4 or later	N/A	✔

The following functions have been change

[Ver2.4 -> Ver2.5]

- Improved function -

1. Illustrator 2023 is now supported.

-Fixed bugs-

1. Fixed a bug that the cutting with tool which you specified may not be executed in CF3 series.

[Ver2.3 -> Ver2.4]

- Improved function -

1. Mimaki Register marks SDK is supported.
   Register marks which created based on the Mimaki Register marks SDK with third party software can be recognized by FineCut.

[Ver2.2 -> Ver2.3]

- Improved function -

1. CG-AR series is supported.
   With the division cutting function, cut misalignment due to sheet meandering can be suppressed.
2. CJV330 series is supported.

[Ver2.1 -> Ver2.2]

- Improved function -

1. Illustrator 2022 is now supported.
2. Windows 11 is now supported.
   * Camera for Gravotech laser is not supported.

-Fixed bugs-

1. When the cut data is created using the following functions, it is printed by RasterLink5.
   Frame Extraction / Outline Tool / Move to the Cut Layer / Register Mark Creation [Leave a rectangle as the cutting line].
2. Even if [Leaf Mode] is specified in [Detect Mark] function of Plot dialog, it will return to [Roll Mode] when [Detect Mark] is executed at the next time.

[Ver2.0 -> Ver2.1]

-Fixed bugs-

1. Illustrator exits incorrectly when executing Frame Extraction, Create Shadow / Edge, Trapping, Create Weed Line on Illustrator 2021 (Ver25.4.1).

[Ver1.5 -> Ver2.0]

- Improved function -

1. The product name has been changed.
   FineCut9 -> FineCut/Coat9

[Ver1.4 -> Ver1.5]

- Improved function -

1. Illustrator 2021 is now supported.

-Fixed bugs-

1. Fixed a bug in which guidelines created by compound paths were output as cut lines.

[Ver1.3 -> Ver1.4]

-Fixed bugs-

1. In CF22-1225, the issue that [Reverse Cut Mode] may not be performed correctly has been fixed.
2. In Gravotech laser, the color in the [Cutting Direction] displayed correctly on the [Preview] dialog.
3. A crash problem when FineCut9 is installed on the Korean version of Illustrator has been fixed.
4. The new information of FineCut9 can be acquired through the online information from this version.

[Ver1.2 -> Ver1.3]

- Improved function -

1. Illustrator 2020 is now supported.
2. Camera for Gravotech laser is now supported.
   • The register marks are detected by the camera automatically to output.
   • The new function can be used only by the Gravotech laser model with camera.

-Fixed bugs-

1. In some models, wrong value was displayed as a recommended register mark size in FineCut. The wrong value has been corrected.
2. The output condition setting function by each color and layer for CF3 (M head) can be now used.

[Ver1.1 -> Ver1.2]

- Fixed bugs -

1. "The program can’t start because MSVCP140.dll is missing from your computer." error message is displayed when starting Illustrator.

[Ver1.0 -> Ver1.1]

- Improved function -

1. CJV300 Plus is supported.
2. CG-FXⅡPlus is supported.

[FineCut8 Ver8.7.6 -> FineCut9 Ver1.0]

- Improved function -

1. The UI display was cut off.
2. When operating weed line in the Weed Line dialog, a problem with slow operation occurred.
3. The maximum number of favorites have been increased from 10 to 250, so that the problem, the favorite was not registered when there were more than 10 layer colors.
4. Size in plot preview dialog was not be able to be changed smoothly with mouse.

New functions of FineCut/Coat9

New functions

1. It can be now outputted directly to Trotec Speedy 100/300/360/400.
   It can be outputted by the procedure that outputs to Mimaki plotter.
   Register mark cut can be done by manually adjusting the RED pointer of the laser machine to the printed register mark.
2. It can be now outputted directly to Gravotech LS series.
   (Gravotech driver installation is required.)
   It can be outputted by procedure that outputs to Mimaki plotter.
   Register mark cut can be done by manually adjusting the RED pointer of the laser machine to the printed register mark.
3. CJV300 Plus is supported.
4. CG-FXII Plus is supported.

For Gravotech LS series users

Please download the driver from this Gravotech's site and install it according to the manual of the same site.

About manuals

Download from here.

Precautions for download

Be sure to read the following license agreement before downloading this software.

Return back to list