The product name of FineCut9 has been changed to "FineCut/Coat9" since Ver. 2.0.
* The serial key of FineCut9 can be used as it is.
Further enhancing the potentiality of Cutting Plotter.
Plug-in software "FineCut/Coat9 for CorelDRAW®" responding to highly sophisticated design needs.
What is FineCut/Coat9?
This is a plug-in software that is able to do design, creation of cutting data and its output to a cutting plotter from inside CorelDRAW®.
Compatible with CorelDRAW®
Graphics Suite X7/X8/2017/2018/2019/2020/2021
Technical Suite X7/2017/2018/2019/2020/2021
*CorelDRAW in Macintosh version is not supported.
New Functions of FineCut/Coat9
It supports output to laser engraving machines of other manufacturers.
Mimaki's cutting users can use such laser engraving machines, in the same manner that they operate their own plotter they usually use.
Upgrade to FineCut/Coat9
If you have FineCut product CD-ROM, you can upgrade to FineCut/Coat9 with free of charge.
FineCut/Coat9 for CorelDRAW Download
Installation of FineCut/Coat9
For FineCut/Coat9, its software provision has been changed to a downloadable type from CD-based software provision in FineCut8 or below.
Downloadable product (package/upgrade/standard accessory/bundled software version)
Minor version upgrade from FineCut/Coat9
This product is available from Mimaki's website by downloading it online, following which you should enter the serial key.
Upgrade from a previous version
This product can be used after obtaining and entering the serial key for FineCut/Coat9 by means of a tool that authorizes a previous FineCut CD.
* If you have FineCut product CD-ROM, you can upgrade to FineCut/Coat9 with free of charge.
Serial authentication procedure