Specification

UJV500-160
Head		On-demand Piezo head (6 printheads with 3 staggered configuration)
Print width		297mm ～ 1,610mm
Print resolution		300dpi、600dpi、900dpi、1,200dpi
Ink	Type	UV curable ink: LUS-120（C、M、Y、K、W） UV curable ink: LUS-150（C、M、Y、K、Lc、Lm、W） UV curable ink: LUS-200（C、M、Y、K、W）
	Supply system	Supplied by 2L Ink Station
	Ink Circulation (*1)	White ink circulation by MCT (Mimaki Circulation Technology)
	Ink degassing module	Equipped with MDM (Mimaki Degassing Module)
Media	Size	1,620 mm or less
	Roll weight	60 kg or less
	Thickness	0.1 mm ～ 1 mm (The thickness in which media can be feeded)
	Roll diameter	φ300 mm or less
	Roll inside diameter	2-inch、3-inch
	Cutter	Y-direction cutter after head section
Media heater		3-way inteligent heater (Pre/Print/After)
Print gap		1.5 mm ～ 7.0 mm (Configurable by users, automatic recognition of the thickness)
Print accuracy	Absolute accuracy	± 0.3 mm or ± 0.3% from specified print distance
	Repeatability	± 0.2 mm or ± 0.1% from specified print distance
UV unit	Head unit	Equipped with UV LED (Lifetime: about 5,000 hours) *2
	Post cure unit	Equipped with fluorescent UV tube lamp (Lifetime: about 1,000 hours) *2
Interface		USB2.0
Applicable standard		VCCI class A, CE Marking, CB Report, UL, RoHS Directive, Machinery Directive
Power specification		AC 200 - 240 V 50/60 Hz
Power consumption		7.2 kVA or less
Operational environment	Temperature	20 ℃ - 30 ℃
	Humidity	35 - 65 %Rh
	Dust	Equivalent to normal office level
Dimensions (W X D X H) (*3)		3,852×1,977×1,690mm
Weight (*3)		800kg

*1 MCT works only with white ink.
*2 Reference value. There is no guarantee as to the lifetime.
*3 Ink Station is not included in the dimensions and the weight.
・Every UV ink is sold by the litter. Please put it into the Ink Station.
・As ink flexibility of LUS-120, LUS-150, LUS-200 may vary according to the substrate, please verify your substrate in advance.
・Inks would not be cured when printing speed is faster than that of draft mode.

Ink set

LUS-120 ［C,M,Y,K,W］	C　M　Y　K
	C　M　Y　K　W
LUS-150 ［C,M,Y,K,Lc,Lm,W］	C　M　Y　K
	C　M　Y　K　Lc　Lm
	C　M　Y　K　W
LUS-200 ［C,M,Y,K,W］	C　M　Y　K
	C　M　Y　K　W

• Some of the screens and printing samples in this website are artificial renderings.
• Specifications are subject to change without notice.
• All trademarks or registered trademarks are the property of their respective owners.
• Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.

---

Inks and substrates:

• Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
• Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.

---

Safety notice:

You are dealing with UV light sources that may harm your health. Please follow below guidelines strictly:

• Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
• Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
• In addition, please read the instructions and guidelines of the manual carefully and follow those.

---