Specifications

TPC-1000
Maximum print/cut width		1,020 mm
Print resolution		540 dpi, 720 dpi, 1440 dpi
Print mode (Scan x Feed)		540 x 720 dpi, 540 x 900 dpi, 540 x 1080 dpi
		720 x 540 dpi, 720 x 720 dpi, 720 x 1080 dpi, 720 x 1440 dpi
		1440 x 1440 dpi
Ink	Type (Select either dye sublimation or solvent ink)	Dye sublimation ink: Sb53 ink Solvent ink: SS21 ink, ES3 ink
	Capacity	4-color mode: 440 cc cartridge x 2/color, 880 cc/color
		6-color mode: 440 cc cartridge x 1/color, 440 cc/color
Media	Size	Up to 1,030 mm
	Thickness	Less than 1.0 mm
	Roll weight	Less than 25 kg (55 lbs.)
	Roll diameter	Inside: 2 inch, 3 inch / Outside: Less than φ180 mm (7.1")
Maximum cutting speed		30 cm: 11.8"/s (42 cm: 1 6.5"/s at the angle of 45)
Cutting force		10-350 g
Applicable tools		Cutter, Water based ball-point pen, Oil based ball-point pen
Media cutting		Cutting in Y direction by cutter on the head
Media heater		Pre/print/post heater
Media take-up device		Roll take-up device (Standard), inside/outside selectable
Command		MRL-III, MGL-IIc2
Interface		USB 2.0
Applicable standard		VCCI class A, FCC class A, UL60950, CE Marking (EMC directive, low voltage directive), CB report
Power		AC100V ~ 240V, Less than 1,380VA
Operation environments		20°C ~ 35°C , 35 ~ 65%Rh (No condensation)
Dimensions (W × D × H)		1,934 x 739 x 1,424 mm (76.1" x 29.1" x 56.0")
Weight		130 kg (286 lbs)

• Some of the samples in this website are artificial renderings.
• Specifications, design and dimensions stated in this website may be subject to change without notice (for technical improvements, etc).
• The corporate names and merchandise names written on this website are the trademark or registered trademark of the respective corporations.
• Inkjet printers print using extremely fine dots, so colors may vary slightly after replacement of the print heads. Also note that if using multiple printer units, colors could vary slightly from one unit to the other due to slight individual differences.

---