Specifications

TS3-1600
Head		On-demand Piezo head (180nozzles x 8 lines) x1 head
Maximum print width		1610mm (63.3")
Printing resolution		540, 720, 1440dpi
Printing mode (scan x feed)		540 x 720dpi, 540 x 900dpi, 540 x 1080dpi
		720 x 540dpi, 720 x 720dpi, 720 x 1080dpi, 720 x 1440dpi
		1440 x 1440dpi
Ink	Kind	Exclusive Sublimation ink: Sb53, Sb54
	Capacity	4-color mode:440cc cartridge x 2/color, 880cc/color or 2L pack x 2/color, 4L/color
		6-color mode:440cc cartridge x 1/color, 440cc/color or 2L pack x 1/color, 2L/color
Media	Size	1620mm (63.9")
	Roll weight	less than 25kg (55.1lbs.)
	Printing surface	Face out
	Roll inside diameter	2 inch or 3 inch
Media cutting		Cutting on Y direction by cutter at the head
Media heater		Triple stage intelligent heater (Pre/Print/Post)
Media Take-up device		Roll take-up device (standard), inside/outside selectable
Interface		USB2.0
Applicable standards		VCCI Class A,FCC Class A, UL 60950 CE Marking (EMC Directive, Low Voltage Directive), CB Report
Power		AC100~120V±10%, AC220~240V±10%, 50/60Hz±1Hz
Power consumption		Less than 1440 VA
Operation environments		Usable temperature:20°C to 35°C, Humidity:35% to 65%Rh, Not condensing
Dimensions (W x D x H)		2538 x 739 x 1424mm (99.9" x 29.1" x 56.1")
Weight		160kg (353lbs.)

• Some of the samples in this website are artificial renderings.
• Specifications, design and dimensions stated in this website may be subject to change without notice (for technical improvements, etc).
• The corporate names and merchandise names written on this website are the trademark or registered trademark of the respective corporations.
• Inkjet printers print using extremely fine dots, so colors may vary slightly after replacement of the print heads. Also note that if using multiple printer units, colors could vary slightly from one unit to the other due to slight individual differences.

---