Specifications

		CG-60SRIII	CG-100SRIII	CG-130SRIII
Acceptable sheet width		90 - 740 mm (3.5 - 29.1")	90 - 1,250 mm (3.5 - 49.2")	90 - 1,550 mm (3.5 - 61.0")
Effective cutting area *1		606 mm × 51 M (23.9" x 167.3')	1,070 mm × 51 M (42.1" x 167.3')	1,370 mm × 51 M (53.9" x 167.3')
Maximum speed		Cutting: 70 cm/s, Moving: 100 cm/s
Adjustable speed range		1 - 10 cm/s (1 cm/s step adjustment): 0.4 - 3.9"/s (0.4"/s step adjustment) 1 - 70 cm/s (5 cm/s step adjustment): 0.4 - 27.6"/s (2.0"/s step adjustment)
Mechanical resolution		X direction: 2.5 μm、Y direction: 5 μm
Command resolution		25 μm or 10μm（ MGL-IIc） / 100 μm, 50 μm（ MGL-Ic1）
Repeatability *2		± 0.2 mm / 2 M
Effective Repeatability *3		586 mm × 2 M	1,050 mm × 2M	1,350 mm × 2M
Maximum pressure		500g
Range of down pressure	Cutter	10 - 20 g（2 g step）, 20 - 100 g（5 g step）, 100 - 500g（10g step）
	Pen	10 - 20 g（2 g step）, 20 - 100 g（5 g step）, 100 - 150g（10 g step）
Acceptable sheet *3		Vinyl sheet, Fluorescent type vinyl sheet, Reflective sheet, Rubber sheet
Acceptable tool *4		Cutter, Ball-point pen
Type of command		MGL-IIC / MGL-Ic1
Interface		USB2.0、RS-232C、Ethernet
Receiver buffer size		27 MB Standard (When sorting, 17 MB)
Operational environment		5 - 35 degC (41 - 95 degF), 35 - 75 ％ (Rh), Non-condensation
Power requirement		AC 100 V - 240 V, 145 VA or less
Dimensions（W×D×H）		1,030 × 430 × 335 mm (40.6 × 16.9 × 13.2") 1,030 × 430 × 1,185 mm *5 (40.6 × 16.9 × 46.7") *5	1,530 × 580 × 1,150 mm (60.2 × 22.8 × 45.3")	1,830 × 580 × 1,150 mm (72.0 × 22.8 × 45.3")
Weight		24kg (52.9 lb.)	41kg (90.4 lb.)	46kg (101.4 lb.)
Stand		Optional equipment	Standard equipment	Standard equipment

*1: Maximum sheet feeding length differs depending on the software.
*2: Except for media expansion and contraction due to temperature.
*3: Operated with Mimaki specified media, cutter and cutting conditions.
Thickness of rubber and its cutting speed are limited. Guaranteed accuracy environment: Temperature 12 - 25 degC (53.6 - 77 degF), Humidity 45-65%
*4: Our dedicated cutter blade and specified commercial ball-point pens are available. (Drawing quality of ball-point pen is not warranted)
*5: When equipped with the optional stand (OPT-0231)

• Some of the screens and printing samples in this website are artificial renderings.
• Specifications are subject to change without notice.
• All trademarks or registered trademarks are the property of the respective owners.

---