Specifications

UJF-605RII
Print head		Piezo-electric drop, on-demand
Resolution		300×300dpi, 600×600dpi, 1,200×1,200dpi, 1,200×2,400dpi
Ink		Original UV-curable ink (YMCKLmLc + White) 400cc ink cartridge for each color
Max. Printing Width		600×500mm (23.6"×19.7")
Distance Accuracy	Absolute accuracy	0.1mm (0.0039")or less
	Repeatability	±0.2mm (0.0078")or less
Perpendicularity		0.5mm / 500mm (0.0196" / 19.6")
Waste Ink Tank		Bottle type (2 liters)with sensor
Media Size	Roll	Maximum width: 640mm (25.20") Minimum width: 150mm (5.91") Weight: less than 25kg (55.0lbs.)
	Cut Sheet	640×520mm (25.20"×20.47")
Media thickness	Roll	0.02 to 0.2mm
	Cut Sheet	0.02 to 2.0mm
Media Set Device		Suction by air vacuum
UV Device		Equipped with UV lamp
Interface		IEEE1394/IEEE1284
Applicable standard		VCCI Class A, FCC Class A, ETL (UL 60950), CE Marking (EMC Directive, Low Voltage Directive), CB report, RoHS Directive
Power specification		Printer main unit / UV device, single-phase 200V-240V, 20A
Power Consumption		4.0KVA or less
Operational Environment	Temperature	15°C to 30°C (60°F to 80°F)
	Humidity	35% to 65% Rh
	Guaranteed temperature	18°C to 25°C (65°F to 77°F)
	Dust	Equivalent to normal office level
Wight		795kg (1,751lbs.)or less
Outside Dimensions (W×D×H)		2,340×1,920×1,530mm (92.1"×75.6"×60.2")

*Inks would not be cured when printing speed is faster than that of draft mode.

---

Inks and substrates:

• Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
• Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.

---

Safety notice:
You are dealing with UV light sources that may harm your health. Please follow below guidelines strictly:

• Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
• Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
• In addition, please read the instructions and guidelines of the manual carefully and follow those.

---