MIMAKI SINGAPORE PTE. LTD.

UJF-706 [End of sale]

Specifications

UJF-706
Head On-demand Piezo head
Print resolution 600 × 600 dpi, 1200 × 1200 dpi
Inktype Hard UV curable ink : 6 colors (CMYKLcLm) + W + CL
Flexible UV curable ink : 6 colors (CMYKLcLm) + W
Capacity 440 ml / cartridge
Waste ink tank 4,000 ml
Maximum print width Width : 700 mm (27.6 "), Length : 600 mm (23.6 ")
MediaWidth Width : 710 mm (28.0 "), Length : 605 mm (23.8 ")
Thickness Mini. 0.05 mm (0.002 "), Max. 150 mm (5.91 ")
Weight Less than 10 kg (22 lbs)
Set device Air suction by vacuum
UV device Equipped with UV lamp
Interface USB 2.0
Applicable standard VCCI class A, FCC class A, UL, RoHS Directive, CE Marking, CB Report
Power specifications Single-Phase AC 200 - 240 V
Power consumption Less than 4.0 kVA
Operational environmentTemperature 15 - 30 °C (59 - 86 °F)
Humidity 35 - 65 % Rh
Accuracy guarantee temperature 18 - 25 °C (64 - 77 °F)
Temperature gradient Less than ±10 °C/h (18 °F)
Dust Equivalent to normal office level
Weight 505 kg (1,112 lbs.)
Dimensions (D x W x H) 1,750 mm x 2,500 mm x 1,550 mm (68.9 " x 98.4 " x 61.0 ")

*Inks would not be cured when printing speed is faster than that of draft mode.

  • All trademarks or registered trademarks are the property of their respective owners.
  • Specifications are subject to change without notice.
  • Some of the screens and printing samples in this website are artificial renderings.
  • Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.

Inks and substrates:
  • Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
  • Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.

Safety notice:
You are dealing with UV light sources that may harm your health. Please follow below guidelines strictly:
  • Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
  • Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
  • In addition, please read the instructions and guidelines of the manual carefully and follow those.

UJF-706 Catalog (833.96KB)pdf file

Model

UJF-706 Maximum print area: 700 x 600 mm (27.6 x 23.6")

Related products

Return to Content

PAGETOP