Specifications

Kebab HS
Compatible printer model		UJF-3042MkII e, UJF-3042MkII EX e, UJF-6042MkII e, UJF-7151 plusII
Rotary degree of printing material		Over ±360 degree
Rotation system		Shaft rotation (the shaft fixes the material)
Applicable objects		Cylindrical objects / Tapered media (maximum gradient angle 7.5° *1)
Printable size		Length: 30 mm - 280 mm (1.2 in - 11.0 in) *2 Diameter: 50 mm - 100 mm (2.0 in - 3.9 in)
Printable area	Feeding direction (X)	Under 300 mm (11.8 in)
	Print head moving direction (Y)	Entire circumference of an object
Maximum weight of print material		3 kg (6.6 lb) or less
Interface		Exclusive connector
Installation environment	Temperature	20-35 ºC (68-95 ºF)
	Relative humidity	35-65％Rh
	Recomended Temperature	20-25 ºC (68–77 ºF), Allowable rate of change of temperature: Under±10 ºC/h (±50 ºF/h)
	Dust level	General office level
Weight		Approx. 13 kg (28.7 lb)
Dimensions (W x D x H)		376 mm x 541 mm x 150 mm (14.8 in x 21.3 in x 5.9 in) or less

*1 Maximum gradient angle is limited when the large diameter of the material is 86 mm or more.
*2 In case of using adaptors (standard attachment).

• Some of the screens and printing samples in this website are artificial renderings.
• Specifications are subject to change without notice.
• All trademarks or registered trademarks are the property of their respective owners.
• Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.

---

---

Precautions for UV printing

Inks and substrates:

• Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
• Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.

Safety notice:
You are dealing with UV light sources that may harm your health. Please follow below guidelines strictly:

• Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
• Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
• In addition, please read the instructions and guidelines of the manual carefully and follow those.

---