Specifications

KEBAB
Compatible printer model		UJF-3042HG, UJF-6042
Rotary unit	Rotary degree of print material	Over ±360 degree
	Rotation system	Rollers under print material
Print material	Applicable objects	Cylindrical objects (uneven surface may affect rotation)
	Printable size	Diameter：10mm～110mm (0.39in～4.33in) * When the diameter is less than 64mm, attach a suction table. Length：30mm～330mm (1.18in～12.99in)
	Maximum weight of print material	3kg (6.61lb)
Printable area of UJF-3042HG on KEBAB		Feeding direction (X): Entire surface of the material Print head moving direction (Y): 300mm (11.81in) or narrower
Interface		Exclusive connector
Installation environment	Temperature	20℃～35℃
	Relative humidity	35～65％Rh
	Guaranteed precision range	20℃～25℃ (Allowable rate of change of temperature: ±10℃/h)
	Dust level	General office level
Weight		Approx. 3kg (6.61lb)
Dimensions（W×D×H）		410mm×330mm×57mm (16.14in×12.99in×2.24in)

• Some of the screens and printing samples in this website are artificial renderings.
• Specifications are subject to change without notice.
• All trademarks or registered trademarks are the property of their respective owners.
• Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.

Precautions for UV printing

Inks and substrates:

• Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
• Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.

Safety notice:
You are dealing with UV light sources that may harm your health. Please follow below guidelines strictly:

• Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
• Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
• In addition, please read the instructions and guidelines of the manual carefully and follow those.

---