Specifications

UJV100-160
Print head		On-demand piezo head (2 staggered layout)
Print resolution		360 dpi, 720 dpi, 900 dpi, 1200 dpi
Ink	Type/ Color	UV-curable ink LUS-210 (C, M, Y, K, W, Cl)
	Capacity	1L bottle
Maximum print width		1,610 mm (63.4 in)
Media	Maximum width	1,620 mm (63.8 in)
	Thickness	1 mm or lower
	Roll diameter	φ250 mm or less
	Roll weight	45 kg or less
	Roll inside diameter	2 inch / 3 inch
Certifications		VCCI class A, FCC class A, ETL IEC 62368-1, CE Marking (EMC, Low voltage, Machinery directive, and RoHS), CB, ENERGY STAR®, RCM, EAC
Interface		USB2.0 / Ethernet 1000BASE-T
Power supply		Single-phase AC100-120 / 200-240V±10%, 50/60Hz±1Hz
Operational environment		Temperature: 20–30 °C (68–86 °F) Humidity: 35–65% Rh (Non condensing)
Dimensions (W×D×H)		2,775 x 700 x 1,475 mm (109.3 x 27.6 x 58.1 in)
Weight		167 kg (368.2 lb)

Ink set

LUS-210 ［C,M,Y,K,W,Cl］	C　M　Y　K
	C　M　Y　K　W
	C　M　Y　K　W　Cl

• Some of the screens and printing samples in this website are artificial renderings.
• Specifications are subject to change without notice.
• All trademarks or registered trademarks are the property of their respective owners.
• Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.

---

---

Precautions for UV printing

Inks and substrates:

• Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
• Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.

Safety notice:
You are dealing with UV light sources that may harm your health. Please follow below guidelines strictly:

• Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
• Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
• In addition, please read the instructions and guidelines of the manual carefully and follow those.

---