Specification

Specifications

		CJV30-60BS	CJV30-100BS	CJV30-130BS	CJV30-160BS
Maximum print / cut width		610 mm (24.0")	1,020 mm (40.1")	1,361 mm (53.5")	1,610 mm (63.3")
Print resolution		540 dpi, 720 dpi, 1440 dpi
Print mode (Scan x Feed)		540 x 720dpi, 540 x 900dpi, 540 x 1,080dpi
		720 x 540dpi, 720 x 720dpi, 720 x 1,080dpi, 720 x 1,440dpi
		1,440 x 1,440dpi
Ink	Kind	Exclusive solvent ink: BS3 ink
Ink	Capacity	600 cc cartridge x 2
Media	Width	620 mm (24.4")	1,030 mm (40.5")	1,371 mm (53.9")	1,620 mm (63.7")
	Thickness	Less than 1.0 mm
	Roll weight	Less than 25 kg (55 lbs.)
	Roll diameter	Inside: 2 inch, 3 inch / Outside: Less than φ180 mm (7.1")
Maximum cutting speed		30 cm: 11.8"/s (42 cm: 1 6.5"/s at the angle of 45)
Cutting force		10-350 g
Applicable tools		Cutter, Water based ball-point pen, Oil based ball-point pen
Media cutting		Cutting in Y direction by cutter on the head
Media heater		Pre/print/post heater
Media take-up device		Roll take-up device (Standard), inside/outside selectable
Command		MRL-III , MGL-IIc2
Interface		USB 2.0
Applicable standard		VCCI class A, FCC class A, UL60950, CE Marking (EMC directive, low voltage directive), CB report
Power		AC100V~240V, Less than 1,380VA
Operation environments		20°C~35°C, 35~65%RH (No condensation)
Dimensions (W x D x H)		1,524 x 739 x 1,424mm (60" x 29.1" x 56.0")	1,934 x 739 x 1,424mm (76.1" x 29.1" x 56.0")	2,289 x 739 x 1,424mm (90.1" x 29.1" x 56.0")	2,538 x 739 x 1,424mm (99.9" x 29.1" x 56.0")
Weight		110kg (242 lbs.)	130kg (286 lbs.)	145kg (319 lbs.)	160kg (352 lbs.)

BS3 ［C,M,Y,K］	C　M　Y　K

Some of the samples in this website are artificial renderings.
Specifications, design and dimensions stated in this website may be subject to change without prior notice(for technical improvements, etc).
The corporate names and merchandise names written on this website are the trademark or registered trademark of the respective corporations.
Inkjet printers print using extremely fine dots, so colors may vary slightly after replacement of the print heads. Also note that if using multiple printer units, colors could vary slightly from one unit to other unit due to slight individual differences.