Specifications

UJF-7151 plus
Printhead		On-demand piezo head (6 staggered printheads)
Maximum print resolution		1,200 dpi
Maximum printable area		710 × 510 mm (28 × 20 in)
Ink	Type/Color	LH-100 (C, M, Y, K, W, Cl) MUH-100-Si (Si) LUS-120 (C, M, Y, K, W, Cl) LUS-350 (C, M, Y, K, W, Cl) PR-200 (Primer)
	Package size	200ml bottle (MUH-100-Si) 250ml bottle (LH-100, LUS-120, PR-200) 1L bottle (LH-100, LUS-120, LUS-350, PR-200)
Media	Size	730 × 530 mm (28.7 × 20.9 in) or smaller
	Height	153 mm (6 in) or less
	Weight	10 kg (22 lb) or less
Certifications		VCCI class A, FCC class A, ETL UL 60950-1 CE Marking (EMC, Low voltage, Machinery directive, and RoHS), CB, REACH
Interface		USB 2.0 Hi-speed / Ethernet 1000BASE-T
Power supply		Single-phase AC100 – 120V / AC200 – 240V
Power consumption		1.3kW
Operational environment		Temperature: 15 – 30 °C (59 - 86 °F) Humidity: 35 – 65% Rh (Non condensing) Recommended temperature range for stable operation: 20 – 25 °C (68 - 77 °F)
Dimensions (W × D × H)		2,193 × 1,572 × 1,273 mm
Weight		317 kg (Base stand weight is included)

・Inks would not be cured when printing speed is faster than that of draft mode.

• Some of the screens and printing samples in this website are artificial renderings.
• Specifications are subject to change without notice.
• All trademarks or registered trademarks are the property of their respective owners.
• Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.

---

---

Precautions for UV printing

Inks and substrates:

• Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
• Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.

Safety notice:
You are dealing with UV light sources that may harm your health. Please follow below guidelines strictly:

• Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
• Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
• In addition, please read the instructions and guidelines of the manual carefully and follow those.

---